Sheets + screws + tape + compound
Drywall Calculator
Estimate drywall for one room or several. Get whole-sheet quantities for walls and optional ceilings, plus a practical starting list of finishing materials.
Example only
- Walls + ceiling
- 472 sq ft
- With 10% waste
- 519.2 sq ft
- Using 4 × 8 ft sheets
- 17 sheets
Your result uses your own measurements, not this example.
Measuring guide
Start with the surfaces you will cover
Measure rooms separately when they share the same panel size and type. Run another estimate for areas requiring a different board.
Measure walls
Multiply room perimeter by wall height: 2 × (length + width) × height.
Add ceilings if needed
Check the ceiling for each room you plan to cover. Its area is length × width.
Choose a panel
Select 4 × 8, 4 × 10, or 4 × 12 ft sheets. Confirm the product type and thickness before ordering.
The math
From room dimensions to a material list
Extra sheets help cover cuts and breakage. Finishing materials are estimated from the area actually installed.
Example: a 10 × 12 ft room with 8 ft walls and a ceiling
- Wall area: 2 × (10 + 12) × 8 = 352 sq ft.
- Ceiling area: 10 × 12 = 120 sq ft; total installed area = 472 sq ft.
- With 10% waste: 472 × 1.10 = 519.2 sq ft of sheet coverage to purchase.
- For 4 × 8 ft sheets: 519.2 ÷ 32, rounded up, is 17 sheets.
- Using the reference rates: approximately 590 screws, 166 ft of tape, and 4.25 gal of compound.
These are planning quantities, not a cut layout or a fastening specification. Check your panel, framing, finish, and local requirements.
What the numbers mean
Use the reference rates as a starting point
Accessories can vary with framing spacing, finish level, application method, and product. Enter package sizes only when you have chosen products.
Sheet count uses installed area plus your waste allowance, then rounds up to whole panels.
A planning count, not a substitute for fastening instructions or local code.
Actual joint length depends on sheet layout and corners.
Coverage changes with the compound, number of coats, and finish.
FAQ
Drywall calculator questions
How many 4 × 8 drywall sheets do I need?
Measure the wall and ceiling area, add a waste allowance, then divide by 32 sq ft per sheet and round up. This is an area estimate; your cutting layout may need more sheets.
How do I measure drywall for a room?
Multiply the room perimeter—2 × (length + width)—by wall height. Add length × width if the ceiling will also receive drywall. Repeat for other rooms.
Should I subtract doors and windows?
Leave typical openings included as a practical starting point because cutoffs may not be reusable. Use the optional deduction when a large opening meaningfully reduces the sheets you need.
How much waste should I add?
The calculator starts at 10% extra sheets for cuts and breakage. Change it for complex layouts or your installer’s guidance.
How are screws, tape, and compound estimated?
The starting quantities use a published drywall materials table: about 1,250 screws, 350 ft of tape, and 9 gal of compound per 1,000 sq ft of installed board. Actual use varies.
Does sheet thickness change the count?
The area of a 4 × 8, 4 × 10, or 4 × 12 panel does not change with thickness. Choose the type and thickness required for your wall, ceiling, or fire-rated assembly before buying.
Does the cost include installation?
No. If you enter a price per sheet, the calculator estimates drywall sheet cost only. It excludes finishing materials, delivery, tax, and labor.
References
Sources behind this calculator
These explain panel sizing, measuring, and approximate finishing-material quantities. Follow the instructions for your chosen products.
Material estimating rates
Lowe’s table lists panels, screws, tape, and compound by drywall area.
Lowe’s drywall materials table ↗Measuring and openings
USG explains room-area estimating and why small openings are often figured solid.
USG construction handbook ↗Common panel sizes
Home Depot compares 4 × 8, 4 × 10, and 4 × 12 ft panels and their uses.
Home Depot drywall guide ↗More tools