Pavers + base + sand
Paver Calculator
Estimate paver pieces for a patio or walkway, then plan compacted base, bedding sand, and exposed edge restraint.
Example only
- Measured area
- 120 sq ft
- Extra for cuts
- 10%
- Compacted 6 in base
- 2.22 cu yd
Your result uses your own measurements, not this example.
Measuring guide
Measure before you buy
Use the actual size of one paver. Choose base and bedding depths that suit your site and product; the tool reports compacted volume, not loose delivery volume.
Measure the space
Use feet for project length and width. Break irregular areas into rectangles and calculate each one.
Check the product
Use dimensions, packaging, and coverage from the specific material you plan to purchase.
Adjust the allowance
Change the starting 10% for the layout, cuts, spillage, and site conditions you expect.
The math
How this estimate is calculated
Project area ÷ actual area per paver × (1 + waste), rounded up. Each layer’s cubic yards = area × depth in feet ÷ 27.
Quantities are for material planning. Confirm order units, coverage, and installation details with the product or supplier.
Reference
Source behind this calculator
Compare your project against the manufacturer or retailer guidance for the material you choose.
Project guidance
Check the suggested measurements and confirm coverage for your chosen product.
Lowe’s paver planning guide ↗